Jump to content
Sign in to follow this  
driftscape

Hobbies: What other Hobbies do you have?

Recommended Posts

45 minutes ago, driftscape said:

Correct. But right now it's not registered. I bought it and just brought it home. Not like I can register it anyways because the DMV is closed. But I drove it around the neighborhood to get a feel for it and that's when I noticed the front suspension doesn't seem so good and I inspected it trying to see if the CV axles were bad, but they were fine. Then noticed that the other parts (control arm bushings, tie rods ball joints, sway bar end links) were all in bad shape. Probably never been replaced since it left the dealership. I haven't checked the rear suspension, but I haven't noticed any problems back there. Once I get the front done, I'll go ahead and check the back. Then I will proceed to do a complete fluid change for the transmission, brakes, motor (oil), and the front and rear differential.

 

I'd give a good check on the back as well to be sure all is good along with the brake (lines specifically) due to the age and apparent lack of normal maintenance of the suv.  That is before you decide to register it and start to use on any major roads, streets and such to be safe.

Share this post


Link to post
Share on other sites
Posted (edited)
4 hours ago, ritualclarity said:

I'd give a good check on the back as well to be sure all is good along with the brake (lines specifically) due to the age and apparent lack of normal maintenance of the suv.  That is before you decide to register it and start to use on any major roads, streets and such to be safe.

I have inspected under and the break lines all seem fine. But I haven't pulled off the rear wheels to get a better view of leaf springs or the shocks. Or the rear tie rods for that matter. The catalytic converters look like they can be replaced at some point. Not anytime soon because they look like they'll hold up a for more years, but when I change out the muffler and exhaust to something more ballsy, those will get replaced too. Remember at the time I had a crapped out floor jack. I've since bought a much better one a few weeks ago. But have been waiting for these parts to come in so I haven't moved the SUV.

Edited by driftscape
  • Agree 1

Share this post


Link to post
Share on other sites

Yea, I wouldn't be concerned with the exhaust unless it was so bad you had to address it. It would be rightfully addressed once you get around to changing them out for a better set.

Once you get your new jack.. you will be so busy :D  In a good sense.. ;) 

it is so sad that it is taking so much time to get shipments but it is understandable. Companies had to close down (even if they didn't really have to ;) at least not completely)  Massive increase in shipping for most things have bombed the UPS, FedEX and such so badly they are moving to the holiday metering shipping process to make sure things move in a timely manner but this slows things down. Then... you have international supplies which are almost non exsistant.  I know of some people that ordered supplies from Europe and 3 months later.. nothing.

People are protesting having their Salons open.. they need to protest getting the shipping up and running.. ;) On that note.. some complained to me... wrong thing.. I offered to help them... I'd shave them very good... lol.  They can choose one of 3 levels (lowest levels of course! )  I'd be done before Covid can catch me!  lol... Good job as well.  If I can shave myself 100% to the point where nobody can notice.. I can do others. I have been doing this for more than 15 years. (constantly)  A friend I know at work can do the shaving and is skilled at those designs that was all popular years ago.  Of course, nobody took me up on  the offer... lol

Well I have posted here enough.  I need to give a hobby as well. Most here know I have written guides for modding!  That is one that I do off and on. I also do some light constructions. Finish work in general. Am doing that now at the place where I am at. Some sanding staining, plaster work, light finish wood work. (not as good as I'd like to be .. Crown molding is difficult requires lots of practice .. but other general work is OK... Even some non 90 degree woodwork. did some heavy construction work in my 20's.. Build out some large bay windows. Built them so fucking strong they never had an leak and on one apartment a 100 + pound "puppy" had his bed in the window for close to 5 years. People have used it to sit in as well. (or is it sit on?)  More than 20 years and no problems. In fact I will be likely doing some finish wood work after I post this and have something to eat!  Gotta do that and patch some paint and completely paint the kitchen. :( I guess hobbies don't have to be things you like? If so then all I got is some guides, support for mods on various sites, and chatting on Discord and sites about games. haven't even played much games recently... too busy.

Share this post


Link to post
Share on other sites
Posted (edited)

Don't order anything internationally and it should arrive pretty quick. My parts took less than a week. They came from Arizona, so right next door. I guess if you were to order alien sex toys, yeah, probably take you a moon light and some stars to get here. :P

I used to work for UPS. The driver seems to be doing fine that comes to my neighborhood. But I bet they have some extras hired for the heavy areas. They usually do extra hires right about Christmas time because it's the busiest time of the year. I helped one of my drivers once when I was a pre-loader and never did it again. Asshat made me do all the heavy work while he kicked back and grabbed the packages for me to drop off. I said no for the next 3 seasons after. We were out there till around 11 p.m. every day during Christmas season. And then I had to be in at work by 3 a.m.

Edited by driftscape
  • Agree 1

Share this post


Link to post
Share on other sites

I read somewhere where UPS and FedEx is staggering shipments due to demand... Like they do in Holidays.

I agree on not ordering internationally but... am afraid that some places don't mention they are supplied by international shipments and expect the item to be available (just in time shipping) and I would be the one hurt if I was expecting something critical even if I ordered locally. 

I can only trust companies I have a trust with AND that can assure me that something IS IN CURRENT INVENTORY and would be reserved for me once I purchase it.  Now, sometimes there are great deals from trustworthy companies that I just can't pass up.. lol  However, they usually are things I don't actually really need though.

 

Share this post


Link to post
Share on other sites

Me and my garden....

After the big rain storms in this part of the world I have a 'bug' problem; the leaf miners are back, along with the added pleasure of cabbage loopers, onion flies, and fucking flee beetles.  I really wanted to avoid pesticides but it's too late in the game for me to do fleece row covers, and the garden is too big now for that to be practical.  $200+ worth of materials and MY TIME or I break out (my now outlawed stash) of commercial-grade diazinon.  That shit is so potent birds won't land in a peach tree sprayed with it.

  • Sad 1

Share this post


Link to post
Share on other sites

Me and my garden...yet again.

Spoiler
  • Bug problem resolved; 4 grams of diazinon cut with 20 gallons of water did the trick.
  • Either slugs or snails ate the tender tops off of two of my ginger plants so I had to move them to a new spot.  They're doing better now anyway so moving them was a good idea.
  • The first tomatoes to set are starting to ripen.
  • Picked enough cucumbers to make a batch of half-sour pickles with the dill and garlic I grew myself.
  • The pinto beans I planted for next year's seed have started to set pods.  They're tiny but that will change in about a month.
  • The Rouge Vif D'Etampes French market pumpkins have set both male and female flowers but they're not open yet.
  • The Sugar Baby mini watermelons are blooming.
  • Harvested most of the radishes but I don't like radishes (grew them as a filler crop).  Probably give them away.
  • Dug up one of the potato plants that was stunted and didn't blossom.  It had teeny-tiny tatters on new roots so I know the others are producing.
  • Did a major thinning on the turnip greens and left maybe ten to go ahead and root out.
  • All of the Kentucky Wonder green beans came up (which is a fucking miracle) and a few of them have sent out vines.  Their trellis is already up so I just need to string them as the grow.

That's it.

  • Like 2

Share this post


Link to post
Share on other sites

Hello I got a question about a mod. The chryslus bar and grill mod. I have them downloaded now. How do I access them?? 

Share this post


Link to post
Share on other sites
Posted (edited)
1 hour ago, Cunthunter12 said:

Hello I got a question about a mod. The chryslus bar and grill mod. I have them downloaded now. How do I access them?? 

It's been a very long time, I don't remember the name of the location. But if you go south of Megaton, There is a garage shop/dealership at Fairfax Ruins. There's a Enclave that likes to spawn right in front of it. When you go inside, you'll see a black Corvega in prestine condition. Target it and you will wind up there.

https://fallout.fandom.com/wiki/Car_dealership

Edited by driftscape

Share this post


Link to post
Share on other sites
Posted (edited)

I made the mistake of buying this piece of crap. I've invested more money than I thought I would and day 2 working on suspension has been another waste of time. I'm not interested in investing in more tools for something that should've been easy to troubleshoot. I threw in a butt load of cash in parts and tools with little to no results.

Edited by driftscape

Share this post


Link to post
Share on other sites
3 hours ago, driftscape said:

I made the mistake of buying this piece of crap. I've invested more money than I thought I would and day 2 working on suspension has been another waste of time. I'm not interested in investing in more tools for something that should've been easy to troubleshoot. I threw in a butt load of cash in parts and tools with little to no results.

sorry to hear this... working on old trucks are difficult and so many things can go wrong.

Share this post


Link to post
Share on other sites
14 hours ago, ritualclarity said:

sorry to hear this... working on old trucks are difficult and so many things can go wrong.

Don't mind me. I've just been having a few frustrating days with it. I just needed to vent.

Share this post


Link to post
Share on other sites
2 hours ago, driftscape said:

Don't mind me. I've just been having a few frustrating days with it. I just needed to vent.

Very understandable. I tried to (and succeeded to some degree) with an old car and had serious problems from time to time and still even when I got rid of it. Eventually it became too much for me to be able to deal with... however, likely not the same situation as it was the first car  (old car close to 20 years old and meant to only be used for a couple of years.)  It was a blast to own and I enjoyed it and learned so much as a result.  I suspect your SUV is much better condition ;) At least it isn't  at risk of having large objects fall out of the trunk!  :P

Vent all you need to. Hobbies can be frustrating from time to time.

Share this post


Link to post
Share on other sites
Posted (edited)

This is the problem that I'm having.

I've tried this method and 4 others and none of them work. I've also tried two other methods from tips on guys who work on the same vehicle on another forum and nothing. The ball joint is just stuck to the knuckle and I can't even get it to slightly break free.

Spoiler

20200531_100733.thumb.jpg.9fd98da59c72dacf3c72074c20e1e11a.jpg20200531_100815.thumb.jpg.82cea5c2a70cbb2b98def5551c4e13b2.jpg20200530_172157.thumb.jpg.5c2e3b8738a18fd53cdca37e0642f6c5.jpg

 

Edited by driftscape

Share this post


Link to post
Share on other sites

Finally got the son of a bitch off.

Spoiler

20200602_190636.thumb.jpg.017ce63f95d6c71cdcfea4b36554b6df.jpg

 

All thanks to my roommate for helping. No way I could've done it alone.

  • Like 2

Share this post


Link to post
Share on other sites

It's Pulp Action week at my worktable!
Flash Gordon and Friends:
Flash.jpg.aaaca0b4ad08617d0d7946279fd99e2b.jpg
Doc Savage and Conan:

Spoiler

Pulp.jpg.f0278720e7a2ae766c1c6e144563afe0.jpg


All miniatures "Heroic" 28mm scale, about 1 1/4"  high. excellent detail on all the minis. Something fun to paint for a change.

  • Like 2

Share this post


Link to post
Share on other sites

My Rouge Vif D'Etampes pumpkins have set a few female flowers with fruit and they actually opened!  The bees were doing their thing; buzzing from male flowers to females and back and forth.  Hopefully I'll get pumpkins and they won't die back.

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...